Shop
Showing 1–45 of 926 results
-
Z-Discountinue
620003 Image/Video Borescope Console • Vogel Germany
top model for varied industry purposes, e.g. automotive-, machinery-, pipeline-, shipbuilding-, aircraft-, turbine-, wind power industry, and many more. For quick, visual inspection and documentation, useful in hard to reach places
SKU: 620003 -
Chain Hoist
CCBTGS-0200 Single Bar Geared Combination Units
Each unit comes fully certified with a test certificate or an EC Declaration of Conformity stating compliance with the essential health and safety requirements of the Machinery Directive 2006/42/EC.
Due to our policy of continual product development, dimensions, weights and specifications may change without prior notice. Please check with your Tiger sales team when ordering.
SKU: CCBTGS-0200 -
Chain Hoist
CCBTPS-0200 Single Bar Plain Combination Units
Each unit comes fully certified with a test certificate or an EC Declaration of Conformity stating compliance with the essential health and safety requirements of the Machinery Directive 2006/42/EC.
Due to our policy of continual product development, dimensions, weights and specifications may change without prior notice. Please check with your Tiger sales team when ordering.
SKU: CCBTPS-0200 -
Torque Measurement
MiniTest 725FN1.5 Coating Thickness Measurement
The intelligent solution for coating thickness measurement
- Modular design made-to-measure
- With built-in, external or convertible sensors
- Bluetooth for data transfer to a PC, Tablet-PC or smartphone
- Wireless sensors
- Special miniature and tube sensors
SKU: 725FN1.5 -
Pipe cutters
VC-0 Plastic Pipe Cutters 26-63mm. MCC Japan
Ergonomic Handle Design gives you less stress during operation.
Quick Release Blade mechanism: It’s not necessary to open the handle with both hands to release the blade.
Extreme Cutting Leverage Design: less effort & less work in operation.
Simple Blade Exchange: Only two steps to exchange the blade. Less risk to lose any parts (except VC-0363)
Compact Design: While still in a small and compact unit, the VC-0334 & 0348 still has the ability to cut larger pipe.SKU: VC-03 -
-
-
-
Pipe cutters
TC tubing cutter for corrugated stainless steel pipe Ø28 – Ø32 – Ø42mm
The compact design of MCC Tubing Cutters gives you a shorter range of motion and greater maneuverability.
Six individually installed stainless steel ball bearings provide you with an accurate and effortless cut.
An Ergonomically Designed handle allows you to attain a comfortable, yet firm grip while you work.SKU: TC- -
Pipe cutters
PCFB-Four Wheel Pipe Cutters with Bearing Ø21–Ø64mm. MCC Japan
Designed for work in area where a complete turn is impossible such as pipe against wall or ceiling. Only 130 degree swing to make a complete cut. Cuts stainless steel pipe with no problems.
Bearing installed at every cutter wheels for smooth operation and precision cutting avoiding it from spiral rotation. (Available only PCFB-50)
Easy setting by quick open-close design.SKU: PCFB- -
-
-
-
Pipe cutters
180-76 Pipe cutter 6-76 mm made of die cast aluminium
With built-in wheel ELORA-No. 180-S76B 30 x 6,2 mm for plastic and composite tubes
Spare wheel in rotary knob cap ELORA-No. 180-S76A for thin-walled metal tubes 19 x 6,2 mm
With 4 guiding rolls + ICS-wheel quick-change system
Spare wheel in rotary knob cap
With rapid feedSKU: 180-76 -
Pipe cutters
182-26 Plastic tube snip, suitable for PE, PP, PVC, PB and VPE tubes and hoses
For plastic- and composite tubes with 1 stainless steel wheel PTFE coated
Suitable for PE-, PP-, PVC-, PB- and VPE tubes and hoses
For clean, right-angled cuts
Made of magnesium die-cast
Made in GermanySKU: 182-26 -
Pipe cutters
181-ST Pipe cutter fort thin-walled metal tubes
181-ST1 – especially suitable for V2A tubes, made of die-cast zinc
181-ST2, 181-ST3 – as above, however with 4 needle guide rollers made of stainless steel
181-ST2 made of magnesium die-cast
181-ST3 made of aluminium die-cast
Made in GermanySKU: 181-ST -
-
-
Hydraulic Pumps
AHP series Lightweight aluminium hand pumps, 700 bar
Our 2-speed hand pumps are always characterized by their rugged
construction and easy-operation handles.
Aluminium alloy construction and handy release knobs with locking mechanism
are perfect for industrial applications and daily operationsSKU: AHP series -
-
-
-
Hydraulic Pumps
HP 80 series Steel hand pumps, heavy-duty, 8 liter, 700 bar
Automatic overload-relief valve (700 bar)
protects components in hydraulic systems and
ensures safe operation.
New inlet/outlet design features slow deflation
function reducing noise,
and allows multi-directional operationSKU: HP 80 series -
Hydraulic Pumps
FHB series Steel foot pumps, 700 bar
Max. working pressure: 700 bar
Large 3/8” pressure port for maximum flow.
Betex® innovative foot pumps are not only attractively
designed, but are also durable and stable.
Foot-operated pump and release pedal, providing accurate control for operating in different conditionsSKU: FHB series -
Spanner Sets
121S8M Open ring spanner set 8 PCS. Made in Germany
Carton box packed. For flare nuts e.g. at gasoline or hydraulic pipes.
Open rings are 15° bent. Ring opening set at 30°.
Up to 13 x 14 mm = hex. pattern, all other: bi-hex. pattern.
Matt chrome plated.
ELORA-Chrome-Vanadium 31CrV3 / 1.2208. According to DIN 3118.SKU: 121S 8M
