New advanced design series. Enjoy using this cutter while reducing stress on your hands with our specially designed handle.

JTC-42 dao cắt ống MCC 04 VC-0 series dao cắt ống MCC 05

Pipe cutters

Plastic pipe cutters MCC – Japan

  • No.1 cutting performance in industry. Durability, sharpness, & anti-pipe-cracking. Three great features in one.
  • Ergonomic handle design gives you less stress during operation.
  • Reinforced Mechanism
  • Rust-Free spring and heavy duty ratchet gear sustain a good working condition at any job site.
  • Quick release blade mechanism: It’s not necessary to open the handle with both hands to release the blade.
  • Extreme cutting leverage design: less effort & less work in operation.
  • Simple blade exchange: Only two steps to exchange the blade. Less risk to lose any parts (except VC-0363).
  • Compact design: While still in a small and compact unit, the VC-0334 & 0348 still has the ability to cut larger pipe.
Model Product
Code
Cutting Capacity
Pipe O.D. mm (inch)
Weight
g (lbs)
Replacement
Blade No.
VC-0327 VC-27ED up to 27mm (1″) 260g (0.6) VCE0327
VC-0334 VC-34ED up to 34mm (1.1/3″) 290g (0.6) VCE0334
VC-0342 VC-42ED up to 42mm (1.5/8″) 420g (0.9) VCE0342
VC-0348 VC-48ED up to 48mm (1.7/8″) 400g (0.9) VCE0348
VC-0363 VC-63ED up to 63mm (2.1/2″) 650g (1.4) VCE0363

Note:
VC-0342 comes with a jaw attachment.
A hole on blade can be used for reaming outside of pipe.
Rectangle tubing materials can be cut by using a jaw attachment (color yellow object in the picture) as an optional part for item No. VC-0342.

VC-03 series dao cắt ống mcc 04 VC-0363 dao cắt ống mcc 01

Traditional series

  • Simple Mechanism with the less components.
  • Original design since 1979 when patented in the US.
Model Product
Code
Cutting Capacity
Pipe O.D. mm (inch)
Weight
g (lbs)
Replacement
Blade No.
VC-0200 VC-26A up to Ø26mm (1″) 265 VCE0220
VC-0242 VC-42A up to Ø42mm (1.5/8″) 460 VCE0242
VC0163 VC-63 up to Ø63mm (2.1/2″) 1070 VCE0163
VC-0 series dao cắt ống MCC 04 VC-0 series dao cắt ống MCC

Plastic tubing cutters – V-Shaped blade

  • Clean cut without deformation of pipes by unique V-shape blades.
  • Good for polybutane, polyethylene, rubber tubes and soft plastic pipes.
  • JTC-42 can cut both sleeve pipes and inner pipes simultaneously.
  • Palm size and light weight.
Model Maximum Capacity
Outer Dia.mm
Weight
(g)
Spare Blade
No.
JTC-37 Ø37 220 JTCE37
JTC-42 Ø42 400 JTCE42
JTC-42 dao cắt ống MCC 02 JTC-42 dao cắt ống MCC 03

A/c conduit pipe cutter

  • Designed for cutting ducts and covers of three sizes for airconditioning.
  • A cover and a duct can be cut together (see below picture).
  • Equipped with quick opening mechanism and safety stopper.
Model Size (mm) Weight (g) Spare Blade No.
ADC-101 305 660 ADCE101

Plastic tubing cutters – Single stroke, quick cut

  • Installed a reversible blade which provides an extra spare blade.
  • Quick and easy continuous cutting work by spring loaded handle with long lasting aluminum handle.
Model Cutting Capacity
Pipe O.D. mm (inch)
Weight
(kg)
Replacement
Blade No.
JPC-37 37mm (1.7/16″) 0.15 JPCE37

Tubing cutters for corrugated stainless steel tubing

  • Designed for use in restricted spaces on small diameter.
  • Light weight and durable aluminum body.
  • Good for CSST (corrugated stainless steel tubing), soft copper, brass, and plastic tubing.
FTC series dao cắt ống 01 FTC series dao cắt ống 02
Model No. Cutting Capacity
Pipe O.D. mm (inch)
Weight
(kg)
Replacement
Blade No.
FTC-20 8-20mm (5/16″-13/16″) 0.24 FTCE-20
FTC-25 8-25mm (5/16″-1″) 0.27 FTCE-25
FTC-32 20-32mm (1″-1.1/4″) 0.29 FTCE-32

Tubing cutters – with ball bearing roller

  • MCC Tubing cutters are designed specifically to make clean rotational cuts; weather you are cutting copper tubing or stainless steel
    tubing with out the need to replace the cutting wheel.
  • Well-designed components provide longer lasting sustainability making the cutter highly economical.
  • Compact & lightweight design increases your productivity.
  • Ergonomically designed knob reduces stress on your hands substantially.
  • The heavy-duty cutting wheel with a bearing inside maximizes the durability of the cutting wheel when cutting stainless steel tubing.
  • The compact design of MCC tubing cutters gives you a shorter range of motion and greater maneuverability.
  • Six individually installed stainless steel ball bearings provide you with an accurate and effortless cut.
  • An ergonomically designed handle allows you to attain a comfortable, yet firm grip while you work.
TC series dao cắt ống 01 TC series dao cắt ống 02
Model Cutting Capacity
Pipe O.D. mm (inch)
Weight
(kg)
Replacement
Blade No.
TC-28 28mm (1.125″) 0.15 TCE32
TC-32 32mm (1.375″) 0.31 TCE32
TC-42 32mm (1.375″) 0.41 TCE32

Pipe cutter – Heavy duty

  • MCC pipe cutter is durable and tough.
  • The frame is made of strong special ductile iron, with wheel blades from special alloy steel that is drop forged, precision machined and heat treated.
  • This cutter is operated by hand or drive unit.
  • Heavy duty design for professional use, fast & clean pipe cutting
Model No Capacity
Outer Dia (US Pipe size)
Weight
(g)
Spare Blade
No.
PC-0101 13 – 40mm (1.¼”) 1500 PCE0112
PC-0102 13 – 63mm (2″) 2500 PCE0112
PC-0103 21 – 90mm (3″) 3800 PCE0103

Four-wheel pipe cutters with bearing

  • Designed for work in area where a complete turn is impossible such as pipe against wall or ceiling. Only 130 degree swing to make a complete cut. Cuts stainless steel pipe with no problems.
  • Bearing installed at every cutter wheels for smooth operation and precision cutting avoiding it from spiral rotation.
  • Easy setting by quick open-close design.
  • Cuts stainless steel pipes with no problems.
  • Wide range of capacity. From 21mm(Pipe OD) to 64mm can be cut by PCFB-50.
  • High Grade Cutter Wheel: The most important part in pipe cutter is the cutter wheels. Many years of our experience in producing cutting tools let us found the best cutting edge design and the unique heat treatment that allows the cutter lasts longer than ever.
  • Only 130 degree swing: Against the conventional pipe cutters with single cutter wheel requires to turn the cutter around the pipe to compete a cut, this cutter is significantly easy to use. It can be perfect maneuverability for cutting a pipe in trench or against a wall where has no open space for cutter to turn around or pipe above your head where it’s difficult to turn the cutter around the pipe.
  • Easy cutting by bearing installed: We installed the high quality ball bearing in the cutter wheel. This reduces significantly the cutting effort. Heavy duty stainless pipe? No problems at all! Take MCC four wheel pipe cutter and just make your job easy and get it done right (available only PCFB-50).
  • Quick setting: Latest tool should be user-friendly design and easy to use and save time, rights? MCC made it as you exactly expected how the tool should be. Once you use this quick open-close design, can’t go back to the dinosaurs. It’s that easy.
PCFB dao cắt ống 01 PCFB dao cắt ống 02
Model No Capacity
Outer Dia (US Pipe size)
Weight
(kg)
Spare Blade
No.
PCFB-25 21 – 38mm (1/2 – 1″) 1.3 PCFBE25
PCFB-50 21 – 64mm (1/2 – 2″) 2.3 PCFBE50

Note: Please note that PCFB-25 is NOT equipped the bearing for cutter wheel.

Pipe cutters Elora – Germany

Series 179-16 pipe cutters for thin-walled metal tubes

  • With a cutting wheel and two guide rollers
  • With steel bearing spindle and ICS-wheel quick-change system
  • Yellow powder coating
  • Made of zinc die-cast
Model No Length (mm) For pipe Ø
179-16 55 3 – 16mm / 1/8 – 5/8″
179S-16 spare cutting wheel
179B-16 sprae bolt

Series 180-35 pipe cutter 3-36 mm made of magnesium die cast

  • For thin-walled metal tubes
  • With 4 guiding rolls + ICS-wheel quick-change system
  • With integrated burr remover with NOGA wheel
  • With steel bearing spindle
  • Spare wheel in rotary knob cap
Model No Length (mm) For pipe Ø
180-35 160 3 – 36mm / 1/8 – 1.3/8″
180-S35 spare cutting wheel
180-B35 sprae bolt

Series 180-76 pipe cutter 6-76 mm made of die cast aluminium

  • With built-in wheel ELORA-No. 180-S76B 30 x 6,2 mm for plastic and composite tubes
  • Spare wheel in rotary knob cap ELORA-No. 180-S76A
  • For thin-walled metal tubes 19 x 6,2 mm
  • With 4 guiding rolls + ICS-wheel quick-change system
  • Spare wheel in rotary knob cap
  • With rapid feed
Model No Length (mm) For pipe Ø
180-76 250 6 – 76mm / 1/4-3″
180-S76A spare cutting wheel for thin-walled metal tubes
180-S76B spare cutting wheel for plastic and composite tubes
180-B76 sprae bolt

Series 181-ST… pipe cutter fort thin-walled metal tubes

  • 181-ST1 – especially suitable for V2A tubes
  • With 2 needle bearing guide rollers made of stainless steel
  • With needle bearing cutting wheel for 2A pipes including spare wheel in the turning knob cap
  • With steel bearing spindle and ICS wheel quick-change system
  • Ergonomic rotary knob with integrated spare cutting wheel
  • Made of die-cast zinc
  • 181-ST2 – as above, however with 4 needle guide rollers made of stainless steel
  • With removable tube deburrer + NOGA blade
  • Made of magnesium die-cast
  • 181-ST3 – as above, however with 4 needle guide rollers made of stainless steel
  • With removable tube deburrer + NOGA blade
  • Made of aluminium die-cast
Model No Length (mm) For pipe Ø
181-ST1 75 3 – 30mm / 1/8 – 1.1/8″
181-ST2 160 3 – 35mm / 1/8 – 1.3/8″
181-ST3 250 6 – 76mm / 1/4 – 3″
181-ST S1/S2 sprae cutting wheel for 181-ST1/ST2
181-ST S3 sprae cutting wheel for 181-ST3
181-ST B1/B2/B3 sprae bolt for 181-ST 1/2/3

Series 182-26 plastic tube snip

  • For plastic- and composite tubes with 1 stainless steel wheel PTFE coated
  • Suitable for PE-, PP-, PVC-, PB- and VPE tubes and hoses
  • For clean, right-angled cuts
  • Made of magnesium die-cast
Model No Length (mm) For pipe Ø
182-26 200 0 – 26mm / 0-1″
182- E 26 sprae blade
182-B sprae bolt

Series 182-42 plastic pipe and composite pipe cutting scissors

  • With 1 stainless steel blade, PTFE coated
  • Suitable for PE-, PP-, PVC-, PVDF-, PB- and PU pipes and hoses
  • For clean, right-angled cuts
  • With ratchet feed
  • Made of magnesium die-cast
Model No Length (mm) For pipe Ø
182-42 200 0 – 42mm / 0 – 1.5/8″
182- E 42 sprae blade
182-B sprae bolt

Seties 182-63 plastic pipe and composite pipe cutting scissors

  • For tubes up to 63 mm / 2. For tubes with 50 mm diameter or smaller with 1 stainless steel blade PTFE coated
  • For plastic pipe and composite pipe cutting scissors with in 2 positions adjustable tube approaching system
  • Suitable for PE-, PP-, PVC-, PVDF-, PB- and VPE- pipes and hoses
  • For clean, right-angled cuts
  • With ratchet feed
  • Made of magnesium die cast
Model No Length (mm) For pipe Ø (mm)
182-63 280 0 – 63mm / 0 – 2.1/2″
182- E 63 sprae blade
182-B sprae bolt

Showing all 19 results

098 712 3398