Original BESSEY all-steel screw clamp GZ with 2-component plastic handle
SKU: GZ Series20 % more clamping force per spindle rotation with optimised rail profile.
Maximum security with linear transfer of force at the sliding arm.
Clamping force up to 6,000 N.
Fixed jaw and sliding arm are constructed of tempered steel for resilient clamping.
High-quality 2-component plastic handle.
Price from: $17.73 – $127.38
(Price just for reference only)
Pressure plates can be replaced by hand – no need for tools (from 80 mm
width)
 |
 |
| SKU | Price | Add | Opening jaw | Độ sâu ngàm kẹp | Thiết diện ray mm |
|---|---|---|---|---|---|
| GZ10-2K | $17.73 | 100mm | 60mm | 15 x 6mm | |
| GZ12-2K | $22.22 | 120mm | 60mm | 15 x 6mm | |
| GZ16-2K | $26.71 | 160mm | 80mm | 17.5 x 6.8mm | |
| GZ40-8-2K | $32.88 | 400mm | 80mm | 17.5 x 6.8mm | |
| GZ20-2K | $35.91 | 200mm | 100mm | 22 x 8.5mm | |
| GZ25-2K | $43.32 | 250mm | 120mm | 24.5 x 9.5mm | |
| GZ30-12-2K | $47.02 | 300mm | 120mm | 24.5 x 9.5mm | |
| GZ40-12-2K | $50.73 | 400mm | 120mm | 24.5 x 9.5mm | |
| GZ50-12-2K | $54.66 | 500mm | 120mm | 24.5 x 9.5mm | |
| GZ60-12-2K | $58.36 | 600mm | 120mm | 24.5 x 9.5mm | |
| GZ80-12-2K | $65.21 | 800mm | 120mm | 24.5 x 9.5mm | |
| GZ100-12-2K | $72.61 | 1000mm | 120mm | 24.5 x 9.5mm | |
| GZ30-2K | $53.98 | 300mm | 140mm | 28 x 11mm | |
| GZ40-2K | $62.06 | 400mm | 120mm | 28 x 11mm | |
| GZ50-2K | $66.55 | 500mm | 120mm | 28 x 11mm | |
| GZ60-2K | $70.14 | 600mm | 120mm | 28 x 11mm | |
| GZ80-2K | $84.40 | 800mm | 120mm | 28 x 11mm | |
| GZ100-2K | $94.61 | 1000mm | 120mm | 28 x 11mm | |
| GZ125-2K | $127.38 | 1250mm | 120mm | 28 x 11mm |
- Pending orders
You may also like…
-
-
Malleable cast iron screw clamps
STC‑VH Vertical toggle clamp with open arm and horizontal base plate
Malleable cast iron screw clampsSTC‑VH Vertical toggle clamp with open arm and horizontal base plate
Lever is in vertical clamping position.
Automatic, seamless adjustment of theclamping height up to 35 mm with almost constant clamping force – without manual changing of the pressing screw position.
Adjustable clamping force up to 2,500 N, based on the adjusting screw in the joint.
Sturdy, tempered sheet steel for longer service life.
Base plate hole pattern suitable for millimetres and inches.
SKU: STC‑VH -
Malleable cast iron screw clamps
STC-IHA15 ush/pull clamp with angled base plate
Moving the handle moves the push-pull rod Automatic and infinitely variable adjustment of the clamping height up to 8 mm while clamping force remains unchanged – without having to make manual changes to the position of the pressure screws Adjustable clamping force up to 1,100 N, based on the adjusting screw in the joint Sturdy, tempered metal sheets for a long service life Base plate hole pattern suitable for millimetres and inches High-quality oil resistant two-component plastic handle with slip protection
SKU: STC-IHA15 -
-
-
Malleable cast iron screw clamps
KRE Series K Body REVO parallel clamp 300-2500mm
Clamping force up to 8,000 N.
Very large parallel clamping surfaces with 3 removable pressure caps
Metal-reinforced plastic housing and optimised sliding arm with double slide protection for more power and safety:
The set clamping force is maintained and the sliding arm cannot unintentionally slip in the unclamped condition.SKU: KRE -
-
Malleable cast iron screw clamps
TG-2K Series Original BESSEY malleable cast iron screw clamp TG with 2‑component plastic handle
Malleable cast iron screw clampsTG-2K Series Original BESSEY malleable cast iron screw clamp TG with 2‑component plastic handle
Clamping force up to 6,000 N
High-quality 2-component plastic handle
Pressure plates can be replace by hand – no tools required (from 80 mm throat depth)
With protective caps on the clamping surfaces
Stable profiled rail with serration
BESSEY anti-slip system (from 80 mm throat depth)SKU: TG-2K Series
There are no reviews yet.